Nordic nRF52833 (the "nRF52", micro:bit v2)

Our MCU has 73 tiny metal pins sitting right underneath it (it's a so called aQFN73 chip). These pins are connected to traces, the little "roads" that act as the wires connecting components together on the board. The MCU can dynamically alter the electrical properties of the pins. This works similarly to a light switch, altering how electrical current flows through a circuit. By enabling or disabling electrical current to flow through a specific pin, an LED attached to that pin (via the traces) can be turned on and off.

Each manufacturer uses a different part numbering scheme, but many will allow you to determine information about a component simply by looking at the part number. Looking at our MCU's part number we find N52833 QIAAA0 2024AL: you probably cannot see it with your bare eye, but it is on the chip. (If you have a later revision of MB2, your number may vary somewhat. This not an issue. The N52833 part should be there, though.) The N at the front hints to us that this is a part manufactured by Nordic Semiconductor. Looking up the part number on their website we quickly find the product page. There we learn that our chip's main marketing point is that it is a "Bluetooth Low Energy and 2.4 GHz SoC" (SoC being short for "System on a Chip"), which explains the RF in the product name since RF is short for radio frequency. If we search through the documentation of the chip linked on the product page for a bit we find the product specification which contains chapter 10 "Ordering Information" dedicated to explaining the weird chip naming. Here we learn that:

• The N52 is the MCU's series, indicating that there are other nRF52 MCUs
• The 833 is the part code
• The QI is the package code, short for aQFN73
• The AA is the variant code, indicating how much RAM and flash memory the MCU has, in our case 512 kilobyte flash and 128 kilobyte RAM
• The A0 is the build code, indicating the hardware version (A) as well as the product configuration (0)
• The 2024AL is a tracking code, hence it might differ on your chip

The product specification does of course contain a lot more useful information about the chip: for example, that the chip is an ARM® Cortex™-M4 32-bit processor.

Arm? Cortex-M4?

If our chip is manufactured by Nordic, then who is Arm? And if our chip is the nRF52833, what is the Cortex-M4?

You might be surprised to hear that while "Arm-based" chips are quite popular, the company behind the "Arm" trademark (Arm Holdings) doesn't actually manufacture chips for purchase. Instead, their primary business model is to just design parts of chips. They will then license those designs to manufacturers, who will in turn implement the designs (perhaps with some of their own tweaks) in the form of physical hardware that can then be sold. Arm's strategy here is different from companies like Intel, which both designs and manufactures their chips.

Arm licenses a bunch of different designs. Their "Cortex-M" family of designs are mainly used as the core in microcontrollers. For example, the Cortex-M4 (the core our chip is based on) is designed for low cost and low power usage. The Cortex-M7 is higher cost, but with more features and performance.

Luckily, you don't need to know too much about different types of processors or Cortex designs for the sake of this book. However, you are hopefully now a bit more knowledgeable about the terminology of your device. While you are working specifically with an nRF52833, you might find yourself reading documentation and using tools for Cortex-M-based chips, as the nRF52833 is based on a Cortex-M design.