Struct nix::sys::ptrace::Options
[−]
pub struct Options { /* fields omitted */ }Ptrace options used in conjunction with the PTRACE_SETOPTIONS request.
See man ptrace for more details.
Methods
impl Options
pub const PTRACE_O_TRACESYSGOOD: Options
PTRACE_O_TRACESYSGOOD: Options = Options{bits: libc::PTRACE_O_TRACESYSGOOD,}
When delivering system call traps set a bit to allow tracer to distinguish between normal stops or syscall stops. May not work on all systems.
pub const PTRACE_O_TRACEFORK: Options
PTRACE_O_TRACEFORK: Options = Options{bits: libc::PTRACE_O_TRACEFORK,}
Stop tracee at next fork and start tracing the forked process.
pub const PTRACE_O_TRACEVFORK: Options
PTRACE_O_TRACEVFORK: Options = Options{bits: libc::PTRACE_O_TRACEVFORK,}
Stop tracee at next vfork call and trace the vforked process.
pub const PTRACE_O_TRACECLONE: Options
PTRACE_O_TRACECLONE: Options = Options{bits: libc::PTRACE_O_TRACECLONE,}
Stop tracee at next clone call and trace the cloned process.
pub const PTRACE_O_TRACEEXEC: Options
PTRACE_O_TRACEEXEC: Options = Options{bits: libc::PTRACE_O_TRACEEXEC,}
Stop tracee at next execve call.
pub const PTRACE_O_TRACEVFORKDONE: Options
PTRACE_O_TRACEVFORKDONE: Options = Options{bits: libc::PTRACE_O_TRACEVFORKDONE,}
Stop tracee at vfork completion.
pub const PTRACE_O_TRACEEXIT: Options
PTRACE_O_TRACEEXIT: Options = Options{bits: libc::PTRACE_O_TRACEEXIT,}
Stop tracee at next exit call. Stops before exit commences allowing tracer to see location of exit and register states.
pub const PTRACE_O_TRACESECCOMP: Options
PTRACE_O_TRACESECCOMP: Options = Options{bits: libc::PTRACE_O_TRACESECCOMP,}
Stop tracee when a SECCOMP_RET_TRACE rule is triggered. See man seccomp for more
details.
pub const PTRACE_O_EXITKILL: Options
PTRACE_O_EXITKILL: Options = Options{bits: libc::PTRACE_O_EXITKILL,}
Send a SIGKILL to the tracee if the tracer exits. This is useful for ptrace jailers to prevent tracees from escaping their control.
pub fn empty() -> Options
Returns an empty set of flags.
pub fn all() -> Options
Returns the set containing all flags.
pub fn bits(&self) -> c_int
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: c_int) -> Option<Options>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: c_int) -> Options
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
Returns true if no flags are currently stored.
pub fn is_all(&self) -> bool
Returns true if all flags are currently set.
pub fn intersects(&self, other: Options) -> bool
Returns true if there are flags common to both self and other.
pub fn contains(&self, other: Options) -> bool
Returns true all of the flags in other are contained within self.
pub fn insert(&mut self, other: Options)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: Options)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: Options)
Toggles the specified flags in-place.
pub fn set(&mut self, other: Options, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Copy for Options
impl PartialEq for Options
fn eq(&self, __arg_0: &Options) -> bool
This method tests for self and other values to be equal, and is used by ==. Read more
fn ne(&self, __arg_0: &Options) -> bool
This method tests for !=.
impl Eq for Options
impl Clone for Options
fn clone(&self) -> Options
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)1.0.0[src]
Performs copy-assignment from source. Read more
impl PartialOrd for Options
fn partial_cmp(&self, __arg_0: &Options) -> Option<Ordering>
This method returns an ordering between self and other values if one exists. Read more
fn lt(&self, __arg_0: &Options) -> bool
This method tests less than (for self and other) and is used by the < operator. Read more
fn le(&self, __arg_0: &Options) -> bool
This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
fn gt(&self, __arg_0: &Options) -> bool
This method tests greater than (for self and other) and is used by the > operator. Read more
fn ge(&self, __arg_0: &Options) -> bool
This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
impl Ord for Options
fn cmp(&self, __arg_0: &Options) -> Ordering
This method returns an Ordering between self and other. Read more
fn max(self, other: Self) -> Self1.21.0[src]
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self1.21.0[src]
Compares and returns the minimum of two values. Read more
impl Hash for Options
fn hash<__H: Hasher>(&self, __arg_0: &mut __H)
Feeds this value into the given [Hasher]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher, 1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher]. Read more
impl Debug for Options
impl Binary for Options
impl Octal for Options
impl LowerHex for Options
impl UpperHex for Options
impl BitOr for Options
type Output = Options
The resulting type after applying the | operator.
fn bitor(self, other: Options) -> Options
Returns the union of the two sets of flags.
impl BitOrAssign for Options
fn bitor_assign(&mut self, other: Options)
Adds the set of flags.
impl BitXor for Options
type Output = Options
The resulting type after applying the ^ operator.
fn bitxor(self, other: Options) -> Options
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign for Options
fn bitxor_assign(&mut self, other: Options)
Toggles the set of flags.
impl BitAnd for Options
type Output = Options
The resulting type after applying the & operator.
fn bitand(self, other: Options) -> Options
Returns the intersection between the two sets of flags.
impl BitAndAssign for Options
fn bitand_assign(&mut self, other: Options)
Disables all flags disabled in the set.
impl Sub for Options
type Output = Options
The resulting type after applying the - operator.
fn sub(self, other: Options) -> Options
Returns the set difference of the two sets of flags.
impl SubAssign for Options
fn sub_assign(&mut self, other: Options)
Disables all flags enabled in the set.
impl Not for Options
type Output = Options
The resulting type after applying the ! operator.
fn not(self) -> Options
Returns the complement of this set of flags.
impl Extend<Options> for Options
fn extend<T: IntoIterator<Item = Options>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
impl FromIterator<Options> for Options
fn from_iter<T: IntoIterator<Item = Options>>(iterator: T) -> Options
Creates a value from an iterator. Read more