Struct nix::sys::epoll::EpollFlags

pub struct EpollFlags { /* fields omitted */ }

Methods

impl EpollFlags

pub const EPOLLIN: EpollFlags

EPOLLIN: EpollFlags = EpollFlags{bits: libc::EPOLLIN,}

pub const EPOLLPRI: EpollFlags

EPOLLPRI: EpollFlags = EpollFlags{bits: libc::EPOLLPRI,}

pub const EPOLLOUT: EpollFlags

EPOLLOUT: EpollFlags = EpollFlags{bits: libc::EPOLLOUT,}

pub const EPOLLRDNORM: EpollFlags

EPOLLRDNORM: EpollFlags = EpollFlags{bits: libc::EPOLLRDNORM,}

pub const EPOLLRDBAND: EpollFlags

EPOLLRDBAND: EpollFlags = EpollFlags{bits: libc::EPOLLRDBAND,}

pub const EPOLLWRNORM: EpollFlags

EPOLLWRNORM: EpollFlags = EpollFlags{bits: libc::EPOLLWRNORM,}

pub const EPOLLWRBAND: EpollFlags

EPOLLWRBAND: EpollFlags = EpollFlags{bits: libc::EPOLLWRBAND,}

pub const EPOLLMSG: EpollFlags

EPOLLMSG: EpollFlags = EpollFlags{bits: libc::EPOLLMSG,}

pub const EPOLLERR: EpollFlags

EPOLLERR: EpollFlags = EpollFlags{bits: libc::EPOLLERR,}

pub const EPOLLHUP: EpollFlags

EPOLLHUP: EpollFlags = EpollFlags{bits: libc::EPOLLHUP,}

pub const EPOLLRDHUP: EpollFlags

EPOLLRDHUP: EpollFlags = EpollFlags{bits: libc::EPOLLRDHUP,}

pub const EPOLLEXCLUSIVE: EpollFlags

EPOLLEXCLUSIVE: EpollFlags = EpollFlags{bits: libc::EPOLLEXCLUSIVE,}

pub const EPOLLWAKEUP: EpollFlags

EPOLLWAKEUP: EpollFlags = EpollFlags{bits: libc::EPOLLWAKEUP,}

pub const EPOLLONESHOT: EpollFlags

EPOLLONESHOT: EpollFlags = EpollFlags{bits: libc::EPOLLONESHOT,}

pub const EPOLLET: EpollFlags

EPOLLET: EpollFlags = EpollFlags{bits: libc::EPOLLET,}

pub fn empty() -> EpollFlags

Returns an empty set of flags.

pub fn all() -> EpollFlags

Returns the set containing all flags.

pub fn bits(&self) -> c_int

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: c_int) -> Option<EpollFlags>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub fn from_bits_truncate(bits: c_int) -> EpollFlags

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub fn intersects(&self, other: EpollFlags) -> bool

Returns true if there are flags common to both self and other.

pub fn contains(&self, other: EpollFlags) -> bool

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: EpollFlags)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: EpollFlags)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: EpollFlags)

Toggles the specified flags in-place.

pub fn set(&mut self, other: EpollFlags, value: bool)

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl Copy for EpollFlags

impl PartialEq for EpollFlags

fn eq(&self, __arg_0: &EpollFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, __arg_0: &EpollFlags) -> bool

This method tests for !=.

impl Eq for EpollFlags

impl Clone for EpollFlags

fn clone(&self) -> EpollFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialOrd for EpollFlags

fn partial_cmp(&self, __arg_0: &EpollFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, __arg_0: &EpollFlags) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, __arg_0: &EpollFlags) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, __arg_0: &EpollFlags) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, __arg_0: &EpollFlags) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Ord for EpollFlags

fn cmp(&self, __arg_0: &EpollFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

impl Hash for EpollFlags

fn hash<__H: Hasher>(&self, __arg_0: &mut __H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl Debug for EpollFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Binary for EpollFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Octal for EpollFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl LowerHex for EpollFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl UpperHex for EpollFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl BitOr for EpollFlags

type Output = EpollFlags

The resulting type after applying the | operator.

fn bitor(self, other: EpollFlags) -> EpollFlags

Returns the union of the two sets of flags.

impl BitOrAssign for EpollFlags

fn bitor_assign(&mut self, other: EpollFlags)

Adds the set of flags.

impl BitXor for EpollFlags

type Output = EpollFlags

The resulting type after applying the ^ operator.

fn bitxor(self, other: EpollFlags) -> EpollFlags

Returns the left flags, but with all the right flags toggled.

impl BitXorAssign for EpollFlags

fn bitxor_assign(&mut self, other: EpollFlags)

Toggles the set of flags.

impl BitAnd for EpollFlags

type Output = EpollFlags

The resulting type after applying the & operator.

fn bitand(self, other: EpollFlags) -> EpollFlags

Returns the intersection between the two sets of flags.

impl BitAndAssign for EpollFlags

fn bitand_assign(&mut self, other: EpollFlags)

Disables all flags disabled in the set.

impl Sub for EpollFlags

type Output = EpollFlags

The resulting type after applying the - operator.

fn sub(self, other: EpollFlags) -> EpollFlags

Returns the set difference of the two sets of flags.

impl SubAssign for EpollFlags

fn sub_assign(&mut self, other: EpollFlags)

Disables all flags enabled in the set.

impl Not for EpollFlags

type Output = EpollFlags

The resulting type after applying the ! operator.

fn not(self) -> EpollFlags

Returns the complement of this set of flags.

impl Extend<EpollFlags> for EpollFlags

fn extend<T: IntoIterator<Item = EpollFlags>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

impl FromIterator<EpollFlags> for EpollFlags

fn from_iter<T: IntoIterator<Item = EpollFlags>>(iterator: T) -> EpollFlags

Creates a value from an iterator.